Wagan AC Inverter Manuel d'utilisateur télécharger pdf (Page 5)

Sine Wave Modiﬁed Sine Wave (MSW)

Wagan Tech and wagan.com are trademarks used by Wagan Corporation.

User’s Manual—Read before using this equipment

www.wagan.com

CONNECTING AND USING AC APPLIANCES

1. Plug an AC product into the three prong AC receptacle and/or a USB

powered appliance into one of the USB power sockets and turn the

inverter on. The green LED will light up. Ensure the total power of all your

products draws 700 watts or less of continuous AC power.

2. To avoid discharging the battery power source, always turn the power

inverter off and disconnect the inverter from the power supply when not

in use.

3. Disconnect the inverter from a vehicle when starting the engine.

TIPS

Measuring the AC Voltage

The output waveform of the AC inverter is a modiﬁed sine wave. To measure the

AC output voltage you must use a true RMS voltmeter.

Adding an Extension Cord

If you need an extension cord, we recommend the use of an extension cord

between the AC output of the inverter and AC appliances. You may use up to

100 feet of a high quality extension cord. A long cord will result in reduced

output power.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Wagan AC Inverter Manuel d'utilisateur Page 5